Manufacture of greenhouses using non -ramous glazing
This type of glazing of facades is very popular among modern designs of sites, as it has a stylish and more aesthetic appearance. When using stinging glazing, it is possible to achieve more light into the room, visually increased it, which is very in demand when designing country houses. The use of non -ramous glazing is the most to this glazing method during the construction of facades of the room, balconies, loggias. But the technology of non -ramous glazing allows you to use it in other buildings that are located on the site. Such buildings are arbors, greenhouses. There is an obsolete opinion that these buildings need a frame. But modern materials presented in the construction markets can destroy this opinion. The main task of the frame is to give a greater strength of the structure, making it more stable and reliable. It is made, often, from metal, namely aluminum or steel. But these materials, in addition to a number of advantages, have a number of disadvantages of no less significant. The first drawback is the significant weight of the structure. Especially if it is made of steel. All structural elements are fastened together using welding or strong screws. If you use an aluminum frame, you can notice a number of improvements before the above option. For example, aluminum is lighter, no less practical and visually more aesthetic. But such designs have a shift high cost, which is their main disadvantage. Not everyone can afford to establish such an expensive gazebo, for example. And besides, this drawback is covered by the main number of advantages of such designs. None of household economic people are used to getting benefits from almost everything and not always aesthetic methods for this. For example, when replacing windows often, old frames are used for the construction of other buildings, especially often in greenhouses. But if the financial situation allows, there is no need to resort to such methods. In this case, the use of non -ramous glazing is considered to be a very good option. The next effect takes place according to a special technology. SPRES are mounted at the base of the greenhouse, which serve as a support for the design, but are subsequently invisible, since they are located inside the double -glazed window. This design looks stylish and unusual and has a number of advantages over the rest. It allows you to achieve great technological capabilities from the greenhouse and absolutely does not interfere with sunlight. mostbet