Molding technology
Initially, moldings were conceived specifically in order to hide the irregularities of the ceilings and walls. However, today this element is often used to arrange all kinds of patterns, decorative details and transitions from the ceiling to the walls. Moldings made on the basis of natural wood look pretty beautiful and expensive. However, it is undesirable to install such products in rooms with a high level of humidity (kitchens, saunas, etc.). You will have to choose the color of the molding yourself, because this material is on sale only in white.
This kind of decor is characterized by ease of installation, a high degree of strength and resistance to mechanical stress. But for the result of the work to bring you positive emotions, it is better to use the instructions that will be discussed in this article. First you need to get all the necessary equipment: a tape measure, a hacksaw, a building level, an electric drill, a small brush, a countersink, a hammer and nails. Well, you can not do without the moldings themselves.
1. Both sides of the wood product should preferably be primed to prevent warping. When the soil mixture dries, paint or varnish can be applied to the molding surface. The coloring of the coating should be selected, guided by personal preferences and features of interior design.
2. Using the level, make a dividing line, then measure the necessary section of the molding. Pay attention to what you need to dock the ends of the product. In the event that the connection point is the corners, then the ends must be filed at forty-five degrees. If a joint with a door or window is supposed to be, then ninety.
3. After this, the molding must be placed to the intended line and pressed firmly, you can not do without an assistant. Next, mark the location of the nails. We take a nail and substitute it to the designated point, gently clogs. You need to nail until the finishing nail leaves a small mark on the surface of the wall.
4. Similarly, sets all other marks and set aside the molding. Make marked holes in the wall with an electric drill. Remove dust from them and strengthen a level by means of nails.
5. Using a countersink, makes tapered indentations around the heads of the nails. Carefully drive in the nails to the stop, after which the holes are carefully puttyed. We wait until the putty dries, after which it treats the surface with fine-grained sandpaper. The final stage is re-painting and varnishing of surfaces.
Useful recommendation. To calculate the required amount of molding, you need to calculate the total perimeter of the processed area. To the resulting value, add ten percent. The total amount should be rounded up. free nude snapchat girls here